Direct: 800-529-6906 Fax: 860-769-7702 fbkamatics-kam@kaman.com US Patents: #7,165,387  #6,233,513 #5,809,703 - other Int. Patents Pending

Testimonials

	"Customer is using your BB Bow for silver coated Cu alloy wires without any problems in quality"
	Producing Bare CU wire 16 strands x .2 mm - "In general what they have seen is appx. 500 TPM more speed with the BBB and 5 amp savings, that equates to a 25% Energy Savings !!
	"Customer he is looking at ordering enough BBB sets to convert all of his NMC 630 machines over. He needs to know how long it would take to supply 40 sets of bows!? he needs all of them delivered before the end of this year"
	"I had given Kamatics some initial savings information, but that was all based on the bow body averaging a 3 year life.  I may have some bows that will last 3 years but my system does not track individual bows all that I could do was guesses"
	Producing Bare CU wire 7 strands x 0.13mm - "With existing bow they rotated the buncher at 1500rpm and with your BB Bow it went up at 2000rpm without any problems; therefore, the customer was happy"
	"On 10.7.2007  the NIE630143AC-H2-1-2 Bow was installed into the machine, the power rating was measured at 35 amps with the standard bow and 24 amps with the BBB.  A large reduction was seen, they were producing a Strand with 0,75mm² (19 wires x 0,23mm) with 5000 Twists/min."
	Producing Nickel plated CU wire - "Customer tested wire produced at 6400tpm, the wire passed all quality checks and there was no pull down.Therefore we made a decision to run the next few reels at 6400tpm which represents a speed increase of 42.2%!! " "The Backbone Bow is showing significant reductions in the current and that will allow us to increase the speed. A small sample was produced late Monday afternoon at 6000 tpm and passed inspection. The speed of the machine was increased to 6000tpm from 4500tpm on first shift Tuesday. All is well, we will plan to pull the new bows late this week or early next week to look at the wear patterns of the ceramics. Results so far: 30.6% decrease in current usage  and 33.3% increase in twists per minute with No changes in the physical properties of the wire."